Priming - Horizontal Stabilizer front spar and attachments

For this priming session, I primed all parts for the horizontal stabilizer front spar. Because there were only 6 individual parts to be primed, this went relatively quickly. With spray gun/compressor settings dialed in from my previous priming session, I was also much happier with the priming results and used less primer than before (~100 grams in total).

Scrubbing down the parts with EkoEtch

Letting the parts dry thoroughly

All parts primed with Charcoal Gray EkoPrime the next morning

Time Taken:     2.0 hours

Dates:                September 2 - September 3 2022

RV-10 Build Total Time:    89.9 hours

Priming Total Time:           10.8 hours (not included in build time totals)