Conduit Routing - Baggage and Rear Seat area
Prior to closing out the baggage and rear seat floors, I gave a lot of thought to routing of wiring and cables that would need to pass from the tail cone forward toward the firewall. As I don't currently have a full picture of the specific wiring that I will need to run, I decided to do what many other builders have done, and run several conduits under the floors through which I will later be able to fish wire bundles. I started planning the conduit runs by first making sure that any potential obstacles were accounted for. I also wanted to avoid cutting additional holes through the bulkheads wherever possible, and luckily there are several existing lightning holes through which conduits can pass. The storage bins I am installing in the baggage area make it difficult to run conduit down the central channels. There is, however, adequate space in the outboard channels Initial plan is to run 3 3/4" conduits down each side of the cabin, with two coming up through each rear seat fl...