Wing Aileron 21-2-1, 21-5-5

While waiting a couple of days for the primed wing ribs to finish curing, I decided to do some prep work on the ailerons. 

I began by separating and deburring the A-1006 and A-1007 outboard and inboard hinge brackets, and then marking, cutting and deburring the 32 aileron skin stiffeners.

A-1006 and A-1007 hinge brackets separated into pairs of individual parts (1 part per aileron)

Skin stiffener angles after initial cut to separate them into 32 individual pieces. All angles were then marked, ready to be trimmed on the band saw

Aileron skin stiffeners after cutting, sanding and deburring

Time Taken:     4.3 hours

Dates:                February 25 - February 27 2024

Aileron Total Time:                       4.3 hours

RV-10 Build Total Time:           608.4 hours

Priming Total Time:                     62.4 hours (not included in build time totals)